

PIVOT SYSTEMS
Manufacture by:

Made in turkey
CENTER PIVOT


These are systems that move circularly on a reinforced concrete platform equipped with steel and make irrigation automatically. Irrigation is done by selecting the nozzle arrangement and sprinkler type that provides homogeneous water distribution according to the current flow and product type. The construction of the system consists of hot-dip galvanized steel. The machines can work on slopes of up to 15%. In Center Pivot Irrigation Systems, water application efficiency reaches 85-95%. The system consists of towers (span) between 34 and 65 meters. The lengths of the systems can reach up to 1400 meters. With the systems, thousands of acres can be irrigated automatically without touching. Center Pivot irrigation systems can irrigate with a single machine starting from 5 decares (5000 square meters) to thousands of decares.
Due to the high water application efficiency, you can save water by using the water used by using 35% to 50% less water than surface irrigation systems. In addition, it is possible to fertilize from a single center in Center Pivot Systems. In this way, you can also save fertilizer.
It is the most economical irrigation system in the world used in large agricultural areas.
WITH CENTER PIVOT IRRIGATION SYSTEMS;
Corn, Wheat, Sunflower
Cane Sugar, Canola,
Barley, Clover,
Sugar beet,
Dwarf Fruit and Citrus Trees,
Melon watermelon,
All forage crops,
Cotton, Onion, Potato
Legumes,
And many other plants can be irrigated.
CENTER PIVOT POINT DETAILS
1) Collector ring: 10-11-12-13 rings, numbered coded, IP 55
2) Main structure has heavy duty legs with the size of 100x100x10 - 80X80X8 - 70x70x7 mm angle iron.
3) The legs are connected with 50x50x5 mm angle iron.
4) Pivot riser pipe and the pivot head are manufactured with 8 5/8” pipe. Riser Pipe seal is V type that is resistive for impermeability under the high pressure. Intake elbow flange can be adjustable for needed direction where the water source comes from. Pivot point has a ladder to reach top.
5) Manometer : 0-10 Bar, stainless stell frame, glycerine Pressure gauge : Low and high pressure protective. 0-10 Bar adjustable.
DRIVE UNIT
The drive unit legs are produced with heavy duty 70x70x7 - 80x80x8mm angle iron.
Horizontal supports are 50x50x4/5mm angle iron.
5-9/16'-6 5/8” drive tube.
OVERHANGS
Extra boom for the irrigation coverage. Steel cable supported. Drainage ball valves are inculuded at the begining and at the end.
The length of the overhang is avaliable between 0,75 Mts. to 24,6 Mts. (2,5ft to 80,7ft)
Manufacture by:

Made in turkey

SECTORAL PIVOT WORK SYSTEM
Systems operating at different angle degrees are called Sectoral Pivot.
SECTORAL PIVOT
Systems operating at different angle degrees (except 360 degrees) that cannot rotate fully in plots close to the square are called Sectoral Pivot.

Manufacture by:

Made in turkey
CORNER PIVOT
In the circularly moving Center Pivot Systems, more areas can be irrigated thanks to a specially designed tower added to irrigate the corner areas where the system cannot reach.
.jpg)
Manufacture by:

Made in turkey
TOWABLE PIVOT (MULTIFUNCTION)
A single system is used to irrigate multiple plots. Thanks to the wheels that are mounted on the central tower and can move (in different directions), it can be transported to the new area to be irrigated by self-propelled or towed with the help of a tractor.

Manufacture by:

Made in turkey
MOBILE CENTER DRIP
These are systems that have been developed due to the more efficient use of decreasing water resources and the need for automatic irrigation machines. With the drip irrigation pipes added to the existing Center Pivot irrigation machines, the machines have the capability of both sprinkler and drip irrigation. In this way, the advantages of drip irrigation and the advantages of center pivots are combined to enable irrigation. . Water application efficiency can reach up to 95-98%.
1) As a result of the use of multi-year drip irrigation pipes, it is environmentally friendly. You don't have to buy drip irrigation pipes all the time.
2) It is economical and easy to maintain since a pipe is used at a rate of 1% -10% of the current drip irrigation pipe amount.
3) It provides the opportunity to do both sprinkler and drip irrigation with the same machine.
4) It is an automatic system. In this way, labor costs are minimized.
5) Fertilizers and pesticides can be applied either from the leaves or to the soil.
With Center Pivot Irrigation Systems,
• Corn, Wheat, Sunflower
• Candy Cane, Canola,
• Barley, Clover,
• Sugar beet,
• Dwarf Fruit and Citrus Trees,
• Melon watermelon,
• All forage crops,
• Cotton, Onion, Potato
• Legumes,
• And many other plants can be watered.

Manufacture by:

Made in turkey
MINI PIVOT
Atlantis Mini Pivot, which we designed for smaller fields, automatically irrigates with a smaller diameter (4 1/2') galvanized pipeline that moves circularly on a reinforced concrete platform equipped with steel and contains high durability.


LINEARS SYSTEMS
LINEAR IRRIGATION SYSTEM
Made in turkey
HOSE FEED LINEAR

Linear irrigation systems are systems developed to irrigate thin and long rectangular fields by moving straight. For the system to work, the machine takes water along a line and irrigates by moving linearly. The machines can work comfortably at slopes of up to 4-5%. The length of the systems can reach up to 1000 meters.
Linear Irrigation Machines can provide irrigation efficiency up to 85-95%. Linear Irrigation Machines do not leave an irrigated area by irrigating up to 98% of the land. It is possible to fertilize from a single center with systems.
With Linear Irrigation Systems;
Corn,
Wheat,
Sunflower,
Sugarcane,
Canola,
Barley,
Alfalfa,
Sugar beet,
Scrub fruit and citrus trees,
Melon,
Watermelon,
All forage crops, cotton, onions, potatoes, pulses and many other plants can be watered.
DITCH FEED LINEAR

Many agricultural areas in the world consist of small and rectangular-shaped lands. Machines that move linearly are needed to irrigate these lands.
Thanks to the technology developed by Atlantis, min. We can produce machines that start from 2 hectares and can irrigate up to 300 hectares with a single machine. In this way, we are able to produce solutions for small farmers and large agricultural investors.

OTHER LINEAR IRRIGATION WORKING SYSTEM
2 WHEEL LINEAR IRRIGATION MACHINES
The water taken from the main pipe, which is laid under the ground throughout the land, by hydrant every 200 meters, is connected to the linear system with the help of the lateral pipe.
HIPPODROME SYSTEM LINEAR IRRIGATION MACHINES
With this type of machines, you can irrigate like Hippodrome. It is possible to irrigate larger lands with a single machine.
CHANNEL SUCTION LINEAR IRRIGATION MACHINES
They automatically irrigate by absorbing the water from the channel opened throughout the land, thanks to a pump placed on the linear machine. There is no need for a pipe to carry water in these machines. It is possible to irrigate larger lands with these systems.
4 WHEEL LINEAR IRRIGATION MACHINES
These are systems that consist of 4 wheels and have a strong traction system designed to irrigate larger lands with linear machines.
TOWABLE LINEAR IRRIGATION MACHINES
The machine, designed for irrigation of rectangular and side by side (adjacent) lands, can be carried to the side land by self-propelled or pulled with the help of a tractor and allows irrigation there.
MONO SPAN LINEAR IRRIGATION MACHINES
They are machines that consist of a single tower and are designed to irrigate small and side-by-side lands by being towed or manufactured as self-propelled. It is economical.

2 WHEEL LINEAR
The water received by a hydrant every 200 meters from the main pipe laid under the soil throughout the land is connected to the linear system with the help of lateral pipe and irrigation

4 WHEEL LINEAR
The water received by a hydrant every 200 meters from the main pipe laid under the soil throughout the land is connected to the linear system with the help of lateral pipe and irrigation

HIPPODROME LINEAR SYSTEM

With this type of machines, you can irrigate like a Hippodrome. It is possible to irrigate large lands with a single machine
HIPPODROME WORK SYSTEM
.jpg)

With this type of machines, you can irrigate like Hippodrome. It is possible to irrigate larger lands with a single machine.
CENTER LINEAR SYSTEM

CANAL SUCTION LINEAR SYSTEM
They absorb water through a pump placed on a linear machine from the canal that opens along the land and perform automatic irrigation. These machines do not need pipes to carry water. With these systems, it is possible to irrigate larger lands.

DITCH FEED LINEAR
Many agricultural areas in the world consist of small and rectangular-shaped lands. Machines that move linearly are needed to irrigate these lands. nnThanks to the technology developed by Atlantis, min. We can produce machines that start from 2 hectares and can irrigate up to 300 hectares with a single machine. In this way, we are able to produce solutions for small farmers and large agricultural investors.

Available in: Bangladesh, China (中国), India, Indonesia, Malaysia, Maldives, Myanmar (Burma), Pakistan,
Russia (Россия), Singapore, Sri Lanka, Turkey (Türkiye), Vietnam
Drip irrigation materials available for Project base or for resell in counties mentioned above,
If you are new in drip irrigation projects Our teams of experts will assist you with complete guidelines and visit your project if necessary
Artha Asia Agriculture will deliver your project products to your door with with our team of experts guide & papers , Import or export duties and tax not applies if you purchasing product within countries mentioned above,